Watersafe Drinking Water Test Kit for Lead (Single)

Product Information

When you have a well, you don’t even have a water quality report to go off, and it’s entirely your responsibility to test your well’s water lead levels. You’ll be responsible for disconnecting your old branch pipe, which may involve crossing your neighbour’s property. Make sure you have permission to do this before you start any work. Commercial Applications for Water Testing: Buyers Guide– Water Testing on vessels, ships as well as water tanks in remote locations There are strict standards for the quality of drinking water within Europe mainly laid down in the EU Drinking Water Directive (98/83/EC). These are based on advice from the World Health Organisation (WHO). If you are welcoming a baby into the house, you should test for nitrate specifically in the early months of pregnancy, again before you bring the baby home, and once more during the first six months of the baby's life. The EPA recommends testing in the spring or summer season, especially during the rainy season.

Lead can be found in air, food, soil and water. High levels of lead in drinking water can be caused by a range of sources:

Frankly speaking, reliability is the key factor when you’re testing your water for lead. If you do not know the amount of lead, you’re compromising on your health and that of your family – not good! Other Analytes

More precise results. Tests carried out under the supervision of experts are much more accurate and valid than DIY test strips. When doing your own testing, chances are you won’t get very accurate results. Disclaimer: Only opinions based upon our own personal experience or information detailed in academic journals or other publications is cited. This has been done exclusively for anyone who is interested in this subject but is not intended to replace proper analysis. We cannot accept responsibility and liability of any kind which may result from the application of this information. We always recommend to consult an expert to discuss any test results or get a full recommendation on the specific subject and specific to your situation by an expert.Anyone who wants to choose between multiple different options to test for lead in city or well water, including DIY test kits and private laboratory tests. You might think you’re safe if you drink public water, as your local authority tests for lead and provides information about water quality for reassurance. But lead pipes may add lead into your water after it has been tested by your local authority or state, and this won’t be included in your local area’s water quality report. Everyone living in areas affected by lead contamination should test their water. Our Watersafe ®Lead Test Kit can detect dissolved lead at levels below the EPA Action Level of 15 parts per billion (ppb). Features & Benefits: Positive: Top line (next to number 2) is darker than the bottom line (next to number 1), or lines are equally dark. If you’re keen to learn more about the common culprits behind water contamination in both city sources and wells, I’ve listed them all in this guide. Is Lead Actually Still A Problem Today?

Test your water for commonly found water impurities including sodium chloride, hydrogen sulfide, E. coli, lead, iron, manganese, fluoride, nitrate and nitrite, total chlorine, sulfate, pH, mercury, and alkalinity.

Copper is a contaminant that’s similar to lead – many residents drink it in the water that’s sent to their homes. The difference is that copper is needed in small amounts in our bodies, but too much copper, especially when accompanied by lead, can be dangerous. We own the communication pipe that starts at our water main and usually runs to the outside stop valve at your property boundary. We’re responsible for fixing or replacing these pipes. Pipework that’s your responsibility You need to fill a glass of water, dip the test strip, and match its color with the chart, and you’re good to go.

Based on the report, the Quality Water Treatment suggests water filters and water softeners to resolve your water problems. Trusted laboratory –ETR Laboratories was established nearly 30 years ago, and is a trusted name in the water testing industry.In most cases, you won’t know that your drinking water contains lead. Unlike other heavy metals, lead is undetectable by sight, smell, or taste, so the only way to detect it is to test it. However, you may be able to work out whether you have lead pipes – and therefore a high risk of lead in your water. If your home was built before 1970 and your pipes are soft, dark gray, and easily marked, they’re probably made from lead. What can you do if you find lead in your water supply? The UK maximum contaminant level for lead in tap water set by DWI/DEFRA is 10µg/l or 10ppb (= 0.01mg/l = 0.01ppm).