About this deal
Podle našich zkušeností 0,5 až 1 litr, to znamená, že při zakoupení 5 litrových kanystrů vyjde jedno základní ošetření 300 – 600 Kč. Povrch je třeba očistit od hrubýchnečistot. Po nástřiku je nutno nechat ošetřenou plochu zaschnout, pro zvýšení výdrže případně nástřik opakovat. Při důkladném dvojnásobném ošetření podvozku jsou investice do XCP max. 1 000 – 1 200 Kč. Zkoušeli jsme XCP Lubricant & Protectpři uvolňování žárovky z objímky 230 V, mimochodem se skvělým výsledkem, a ověřili si, že XCP působí jakoizolant. Když zmenšíte jeho vrstvu na minimum, proud prochází a výborné kluzné vlastnosti zůstávají.
XCP Clear Coat is easy to apply from the spray bottle and hangs onto no more grit after rinsing than TechCote. It can also be poured straight into a paint gun’s pot and applied with a compressor. Clear Coat in an aerosol can is extremely easy to use and only missed out on a Best Buy as the bottle is better value. If you don’t mind paying a bit extra, and won’t want to apply it with a compressor, it’s worth the money.Apply product neat to the surface that requires degreasing. The liquid can also be used as a degreasing soak (bath) for a few minutes, before cleaning off. Then it’s simply a case of spraying the corrosion inhibitor onto all the metal surfaces, avoiding the brakes and tyres. Do not apply any of them to the brake disc carriers as centripetal force will carry them onto the braking surfaces. There are plenty of corrosion inhibitors out there that promise months or even years of protection, but my testing indicates that – at least for a regular winter rider who keeps their bike clean – this is might not be the case. The protectants were tested for material compatibility, to ensure they can’t harm any on your motorbike Clear Coat po nanesení a zavadnutí vytvoří měkký, tenký a nelepivý film. Clear Coat bude chránit před rzí a vnějšími vlivy, zatímco povrch bude stále vypadat skvěle a bude odolný vůči nečistotám.
Pokud si myslíte, že pevné nátěry jsou lepší, tak opravdu nejsou. Podívejte se na spodek svého vozu rok, dva po nástřiku( viz náš blog).
\n\t\t\tXCP Rust Blocker Clear Coat 400ml
In my testing, none of the corrosion protectants I sampled caused any noticeable harm to any of the materials used on motorcycles. Dilute 1 part XCP CLEANER & DEGREASER with up to 10 parts water (select according to strength of cleaning power).